ROC021P-REF ROC HOBBY MXS AEROBATIC V2 ARTF W/O TX/RX/BATT w/REFLEX
ROC HOBBY MXS AEROBATIC V2 ARTF W/O TX/RX/BATT W/REFLEX
The new version 2 MXS 3D aerobatic plane from FMS is designed for the intermediate to advanced 3D pilot.
Built from super strong EPO foam, the MXS is glueless, requiring only 10 screws. Add your 4 channel receiver and 3s 2200mAh battery and you are ready to fly. The strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The updated powerful 3541 1230kv Outrunner, 40amp ESC, & 4 full Metal Gear Digital servos are pre-installed. The precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic manoeuvre desired. Extra long servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminium landing gear with large 2 1/2” wheels make grass take-offs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy task! Painted in bright green and black, the new version 2 MXS is sure to get plenty of attention at the flying field!
FEATURES
- Easy to assemble, only needs glue for wing tip Vortex generators
- New hollow wing design forreduced weight and rigidity
- Wing tip Side Force Generators for superior Knife Edge and slow manoeuvring
- Super strong laminated control surface hinges
- Upgraded Powerful 35-41 1230kv Outrunner motor
- 40amp ESC
- Upgraded 4 digital full metal gear servos
- Wings and tail remove for transport
SPECIFICATION
- Wingspan: 1100mm /43.3in
- Overall Length: 1080mm /42.5in
- Flying Weight: 1100g /38.8oz
- Approx. Flying Duration: 5 minutes
- Material: Durable EPO
ROC HOBBY MXS AEROBATIC V2 ARTF W/O TX/RX/BATT W/REFLEX
The new version 2 MXS 3D aerobatic plane from FMS is designed for the intermediate to advanced 3D pilot.
Built from super strong EPO foam, the MXS is glueless, requiring only 10 screws. Add your 4 channel receiver and 3s 2200mAh battery and you are ready to fly. The strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The updated powerful 3541 1230kv Outrunner, 40amp ESC, & 4 full Metal Gear Digital servos are pre-installed. The precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic manoeuvre desired. Extra long servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier & hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminium landing gear with large 2 1/2” wheels make grass take-offs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy task! Painted in bright green and black, the new version 2 MXS is sure to get plenty of attention at the flying field!
FEATURES
- Easy to assemble, only needs glue for wing tip Vortex generators
- New hollow wing design forreduced weight and rigidity
- Wing tip Side Force Generators for superior Knife Edge and slow manoeuvring
- Super strong laminated control surface hinges
- Upgraded Powerful 35-41 1230kv Outrunner motor
- 40amp ESC
- Upgraded 4 digital full metal gear servos
- Wings and tail remove for transport
SPECIFICATION
- Wingspan: 1100mm /43.3in
- Overall Length: 1080mm /42.5in
- Flying Weight: 1100g /38.8oz
- Approx. Flying Duration: 5 minutes
- Material: Durable EPO