AD-AD-RC03+ Ana-Digit Ltd AD-RC03+ 4-Channel LED Lighting & Control System

PRODUCT INFORMATION:

• AD-RC03+ is a 4-Channel LED Lighting & Control System. The users can fully utilize all the advanced functions of AD-RC03 using a 4-channel gun-style RC system.

  
  NEW FEATURES AND FUNCTIONS

  Besides the original AD-RC03 features and functions, there are some new features and functions as follows.

  Programmable Supported Sound Module

  • Sound Module E (ESS One+ series) by default (originally supported in RC03)
  • ServoNaut SMX / 3T sound module using gun style or stick style transmitter

   

  For ServoNaut SMX / 3T sound module using gun style transmitter

  • Connect TH and Horn to TH and 4-1 of the socket board respectively
  • One CH4 button to control the sound module
  • Press and hold CH4 button to enable horn sound
  • Press CH4 button once to start or stop engine
  • Press CH4 button three times to change gear in sequence of 2-1-3-2

   

  Features:

  • Fully remote operated via a 4 channel transmitter basis
  • 5V~6V BEC operate
  • Channel 3 (VR / 3-step switch / push button) for LED programming to turn on/off LEDs ---- Individual RC switch: Night Mode, Hazard Light, Socket A+B, Pilot Mode, Headlight Half Brightness, Parking Light
  • Channel 3 or Steering: Auto / Manual Indicators
  • Simulation of real vehicle braking, Indicators light effects
  • Reverse sound and lights effects are included
  • Brake: Normal / Crawler (Brake light will turn ON 3 seconds whenever the throttle resumes to centre)
  • User Define "ON" Mode: All the user selected LEDs will be turned on after powering up automatically (Default :All off)
  • Support channel 4 (push button) for 4 receiver output signals to control AD-RC Smoke, winch (need an extra controller), light bar (with receiver signal decoder) and ESS One+ horn (press and hold on).
  • Advanced features of channel 4: flash headlight, clutch mode (activate throttle without movement)
  • User friendly setup mode to program Manual Indicators, Crawler Brake, Beep Selection (backward, beep on/off), Throttle Normal/Reverse, Ch4 Remote Toggle/Hold and Ch4-4 Clutch Setting

  PACKING Includes:

  • Main Unit x1
  • Y-Cable x1
  • User Manual x1
  • LED Wire Assembly x10 (1 Wire with 2 LED)
  • High Power LED x 1 (1 Wire with 2 LED)

  Dimensions

  • Main Unit Size: length 50mm width 46mm height 20mm

• an einen Freund senden
• Produkt vergleichen

PRODUCT INFORMATION:

• AD-RC03+ is a 4-Channel LED Lighting & Control System. The users can fully utilize all the advanced functions of AD-RC03 using a 4-channel gun-style RC system.

  
  NEW FEATURES AND FUNCTIONS

  Besides the original AD-RC03 features and functions, there are some new features and functions as follows.

  Programmable Supported Sound Module

  • Sound Module E (ESS One+ series) by default (originally supported in RC03)
  • ServoNaut SMX / 3T sound module using gun style or stick style transmitter

   

  For ServoNaut SMX / 3T sound module using gun style transmitter

  • Connect TH and Horn to TH and 4-1 of the socket board respectively
  • One CH4 button to control the sound module
  • Press and hold CH4 button to enable horn sound
  • Press CH4 button once to start or stop engine
  • Press CH4 button three times to change gear in sequence of 2-1-3-2

   

  Features:

  • Fully remote operated via a 4 channel transmitter basis
  • 5V~6V BEC operate
  • Channel 3 (VR / 3-step switch / push button) for LED programming to turn on/off LEDs ---- Individual RC switch: Night Mode, Hazard Light, Socket A+B, Pilot Mode, Headlight Half Brightness, Parking Light
  • Channel 3 or Steering: Auto / Manual Indicators
  • Simulation of real vehicle braking, Indicators light effects
  • Reverse sound and lights effects are included
  • Brake: Normal / Crawler (Brake light will turn ON 3 seconds whenever the throttle resumes to centre)
  • User Define "ON" Mode: All the user selected LEDs will be turned on after powering up automatically (Default :All off)
  • Support channel 4 (push button) for 4 receiver output signals to control AD-RC Smoke, winch (need an extra controller), light bar (with receiver signal decoder) and ESS One+ horn (press and hold on).
  • Advanced features of channel 4: flash headlight, clutch mode (activate throttle without movement)
  • User friendly setup mode to program Manual Indicators, Crawler Brake, Beep Selection (backward, beep on/off), Throttle Normal/Reverse, Ch4 Remote Toggle/Hold and Ch4-4 Clutch Setting

  PACKING Includes:

  • Main Unit x1
  • Y-Cable x1
  • User Manual x1
  • LED Wire Assembly x10 (1 Wire with 2 LED)
  • High Power LED x 1 (1 Wire with 2 LED)

  Dimensions

  • Main Unit Size: length 50mm width 46mm height 20mm

• an einen Freund senden
• Produkt vergleichen