120100058 Holmes Hobbies Puller Pro R 540-L V2 Rock Crawler Motor 4100KV

120100058 Holmes Hobbies Puller Pro R 540-L V2 Rock Crawler Motor 4100KV
Preis
169,99*
1 Stück
Lagerbestand
ausverkauft
ausverkauft
Dieser Artikel ist derzeit nicht auf Lager. Bitte geben Sie Ihre E-Mail ein wenn Sie benachrichtigt werden möchten sobald dieser Artikel wieder erhältlich ist.
Ihre Anfrage war erfolgreich.
Die E-Mail ist nicht korrekt!
Der Artikel konnte nicht gefunden werden!
Es ist ein Fehler aufgetreten!
Beschreibung

PRODUCT INFORMATION:

  • High Power, High Torque, High Performance, Smooth Startup!

    When you want efficient power, the Puller Pro delivers the excessive force you desire! The Pro R 540-L is a rock race honed variation with higher quality materials for less heat, more torque, and less brake fade. It retains the best low speed control and throttle feel in the industry, giving you an edge whether in the rocks or on the straights. An absolute beast on 3s!

    Warning! Do not extend screws into motor plate more than 3.5mm or damage to windings may occur.

    Features:
    • Four pole 18mm diameter x 31mm length rotor
    • Twelve slot stator, 180C resin impregnated copper windings
    • 200C rated high strength neodymium magnets
    • Oversized bearings
    • Sensored
    • Waterproof sensor board
    • Sensor wire include

    Specification:
    • "550" size motor
    • 25mm mount pattern
    • M3 mounting screws
    • 5mm shaft
    • 36mm diameter
    • 60.5mm length
    • 236.5g
    • 60,000 rpm ma

    Notes: Designed for dominating 1/10th scale U4, rock racing, endurance, G6, trail adventure, and making general mayhem! Installs into Axial Yeti & Bomber, Losi Rock Rey, Traxxas TRX-4, and similar vehicles accepting 550 size motors. Recommended battery 2s or 3s lipo, 3800mah 35c or greater. Recommended ESC 1/10th or 1/8th scale suitable for 4x4 vehicles. If you get your motor wet, you must clean, dry, and relube bearings to avoid damage.
Informationen
Zubehör
Bewertungen
Frage zum Produkt
Haben Sie eine Frage zu diesem Produkt?
Ihre E-Mail-Adresse:
Ihre Frage:
Bitte geben Sie diese Buchstaben ein
captcha
Beschreibung
Informationen
Zubehör
Bewertungen
Frage zum Produkt

PRODUCT INFORMATION:

  • High Power, High Torque, High Performance, Smooth Startup!

    When you want efficient power, the Puller Pro delivers the excessive force you desire! The Pro R 540-L is a rock race honed variation with higher quality materials for less heat, more torque, and less brake fade. It retains the best low speed control and throttle feel in the industry, giving you an edge whether in the rocks or on the straights. An absolute beast on 3s!

    Warning! Do not extend screws into motor plate more than 3.5mm or damage to windings may occur.

    Features:
    • Four pole 18mm diameter x 31mm length rotor
    • Twelve slot stator, 180C resin impregnated copper windings
    • 200C rated high strength neodymium magnets
    • Oversized bearings
    • Sensored
    • Waterproof sensor board
    • Sensor wire include

    Specification:
    • "550" size motor
    • 25mm mount pattern
    • M3 mounting screws
    • 5mm shaft
    • 36mm diameter
    • 60.5mm length
    • 236.5g
    • 60,000 rpm ma

    Notes: Designed for dominating 1/10th scale U4, rock racing, endurance, G6, trail adventure, and making general mayhem! Installs into Axial Yeti & Bomber, Losi Rock Rey, Traxxas TRX-4, and similar vehicles accepting 550 size motors. Recommended battery 2s or 3s lipo, 3800mah 35c or greater. Recommended ESC 1/10th or 1/8th scale suitable for 4x4 vehicles. If you get your motor wet, you must clean, dry, and relube bearings to avoid damage.
Haben Sie eine Frage zu diesem Produkt?
Ihre E-Mail-Adresse:
Ihre Frage:
Bitte geben Sie diese Buchstaben ein
captcha